Water Tank Truck Body

Model: Water Tank | Water

Pressure: 20,000 liters

Stringers: ASTM A36 steel with tank support cradles

Fixation: As per instructions in the vehicle manufacturer's installation manual

Elliptical section format for capacities of 5,000, 6,000, 7,000 and 8,000 liters, or polycentric section for 10,000, 12,000, 15,000 and 20,000 liters, with stamped lids and wave breakers, Ø 400 mm inspection cover and breather. Walkway on the top of the tank with non-slip paint and protective handrail on the sides.

Self- loading set with vacuum system, with sieve and priming device.

Basis: Application of anti-corrosive primer

Finish: Painting in the indicated color in UV Protection

Optional Finish: Internal tank painting with epoxy protective paint | neutrol.

Plastic fenders with rubber mudguards; Access ladder at the rear of the tank with non-slip floor step; Rear bumper in accordance with CONTRAN Resolution 152; Reflective strips in accordance with CONTRAN Resolution 128; Side protectors in accordance with CONTRAN Resolution 323|09; Electrical system and lights in accordance with CONTRAN Resolution.

Pressure: Centrifugal pump coupled to a torque multiplier box driven by the power take-off, with a maximum flow rate of 75 m³/h and a maximum working pressure of 60 mca.

Sprinklers: "Duckbill" type outlets on the sides and upper rear sprinkler assembly.

Street washer kit: set of two front nozzles attached under the vehicle's front bumper.

Irrigation: Ø 3" rear bar with holes for gravity irrigation, with pneumatic actuation inside the cabin.

Washing: Ø 1" rubber hose, 25 m long, adjustable pressure nozzle for jet and mist. It has a manual retraction reel.